With craftsman’s spirit, SBM always tries to do better.

Toggle Navigation

Domestic Gold Crushing And Separator Machines

Psted On 2018-10-23 16:10:38
Domestic Gold Crushing And Separator Machines

Lifting of Domestic Gold Crushing And Separator Machine brackets

Guide: In the work of Domestic Gold Crushing And Separator Machine, the toggle plate plays a great role, it is very important for the work process and the role of insurance, but it is a wearing part, and maintenance is more troublesome, in order to solve This phenomenon, we need to improve it, to achieve the purpose of improvement, we must improve the four aspects, here is to introduce these improvements.

In the interior of the Domestic Gold Crushing And Separator Machine, there are some parts, both consumable parts and safety parts, such as the brackets. Here we will introduce the improvement of this part, the main purpose of which is mainly because of its It is easy to damage, but the maintenance is more troublesome. For its better use, here is the improvement of the part from four aspects.

Improve one, change the sliding type to scroll type

This mainly refers to changing the toggle plate of the Domestic Gold Crushing And Separator Machine from sliding type to rolling type. Generally speaking, the swing angle of the part is not more than 10°. This form of elbow and elbow pads is rolling. Type, this type of bracket is not only transmission efficiency, but also greatly reduces wear and tear during operation, and the service life is greatly extended;

Improve two, change the lubricating fluid between the elbow and the elbow pad

Because of the influence of the movement characteristics of the elbow and elbow pads in the interior of the Domestic Gold Crushing And Separator Machine, there are lubrication conditions and dust effects, and lubrication is an extremely effective condition for improving wear. The wear between the two parts needs to change the way of lubrication. Generally, it can be lubricated with water. The water can take away the heat generated by the friction and wash away the dust, thus prolonging the service life of the elbow and elbow pads. This type of lubrication is less costly and easy to implement;

Improvement III. Use reasonable elbow and elbow pad structure

In the interior of the Domestic Gold Crushing And Separator Machine, based on the viewpoint of using rolling instead of sliding, and making the elbow pad easy to replace and extend the life, the elbow pad is made into a cylindrical shape, and the two ends are square for easy fixing, and one side can be worn and worn. The other side can be used again, so that it can be used four times in turn to extend the service life while reducing the cost of production;

Improvement IV. Improve the shape of the mating surface of the elbow pad and the elbow.

The shape of the mating surface of the elbow pad and the elbow groove is changed to a trapezoidal shape. Since the fitting portion has a slope, even if the stamping deformation is performed for a long time, the elbow pad is placed in the groove of the elbow seat, and when the elbow pad is replaced It is also easier to remove. This improvement is mainly for the convenience of the replacement of the toggle plate of the Domestic Gold Crushing And Separator Machine;

The article mainly introduces the lifting method of the Domestic Gold Crushing And Separator Machine bracket, mainly introduces the improvement of the Domestic Gold Crushing And Separator Machine bracket from four aspects, the purpose of these improvements is to extend the service life and make maintenance and The replacement work is more convenient.